|
Home
Paving
Sealcoating
Linestriping
Asphalt Repairs
What We Do
Contact Us
|
How does an asphalt driveway compare to concrete and pavers?
Is there a "best time" of year to install a driveway?
How thick is the asphalt which will be installed in my driveway?
Do I need more than 2" of asphalt in my driveway?
Are there different types of asphalt?
Can I use some type of decorative edging such as pavers?
Should this edging be installed prior to my driveway?
How long will it take to install my new driveway?
How long before I can use my new driveway?
Does my new driveway require any specific care?
Why should I seal coat my driveway?
When should my driveway be sealed?
How often should I seal coat my driveway?
Should I have my driveway seal coated professionally or apply it myself?
How is the sealer applied?
How long before I can use my seal coated driveway?
I currently have an existing driveway that requires some maintenance. What are my options?
What caused the damage to my driveway?
How does an asphalt driveway compare to concrete and pavers?
Asphalt can usually be installed without large amounts of preparation, while concrete is poured into forms and pavers require a specific prepared sub-base. Asphalt allows some movement without damage while concrete tends to crack if there is any movement. Although pavers will allow movement they may not reseat themselves in exactly the same position therefore leaving some edges higher than others. In the event damage occurs asphalt can be crack-filled and seal coated which is less obvious and less expensive than concrete repairs. Pavers can be removed and replaced however this process typically is difficult without removing sections therefore raising coats. While al three are available in this area asphalt is the least expensive. Concrete costs as much as 6 to 8 times more than asphalt while pavers can cost as much as 14 to 16 times as more.
To the top
Is there a "best time" of year to install a driveway?
No, a driveway can be installed almost anytime of year weather permitting.
To the top
How thick is the asphalt which will be installed in my driveway?
Typically most driveways are installed with 2" of asphalt.
To the top
Do I need more than 2" of asphalt in my driveway?
No, for most residential applications. However additional thickness is sometimes requested.
To the top
Are there different types of asphalt?
Yes, there are three basic "grades" of asphalt. I-2 or base, I-5 or top, and I-4 or commercial top. Base (consists mainly of 3/4" stone) is primarily used in comstabilizing level. Top is used fore residential and commercial applications. Top, as its name suggests is the top coating in commercial and residential applications. Commercial top (consists of a mix of 3/4" and 3/8" stone) is used as top when additional stability is necessary.
To the top
Can I use some type of decorative edging such as pavers?
Yes, almost anything can be used to decorate the edges.
To the top
Should this edging be installed prior to my driveway?
Not necessarily. Each application is different and can vary depending on the desired outcome.
To the top
How long will it take to install my new driveway?
While installation typically can be completed in one day there are instances where additional time is needed to prepare the existing area.
To the top
How long before I can use my new driveway?
We recommend a minimum of three days before use.
To the top
Does my new driveway require any specific care?
It is recommended that you seal coat your driveway.
To the top
Why should I seal coat my driveway?
Seal coating protects your driveway by filling in the smaller pores and preventing the penetration of moisture which ultimately leads to the deterioration of the surface.
To the top
When should my driveway be sealed?
You should seal coat your driveway within a year of installation. However it is recommended that you allow it to cure for 60 to 90 days.
To the top
How often should I seal coat my driveway?
Most driveways should be seal coated every three to four years; this will vary depending on volume of traffic and weather.
To the top
Should I have my driveway seal coated professionally or apply it myself?
Anyone can purchase the necessary materials to seal coat their driveway. The products we use are a commercial grade not available to the public and the coat of installation is inexpensive.
To the top
How is the sealer applied?
In most cases the sealer is sprayed onto the surface from a large tank. Any borders walkways and building would be edged by hand and then the remainder would be sprayed. In some cases the entire driveway must be done manually.
To the top
How long before I can use my seal coated driveway?
Typically, drying time is less than 24 hours but this may vary due to weather conditions.
To the top
I currently have an existing driveway that requires some maintenance. What are my options?
Depending on the current state of the asphalt there are 3 basic levels of repairs. The easiest method would be to crack-fill and seal coat the driveway. This is not feasible for all existing driveways. At this time there are two options, fist it is sometimes possible to overlay the existing asphalt while at other times it is necessary to remove the existing asphalt and start installation from scratch.
To the top
What caused the damage to my driveway?
There are many factors which can cause damage. In most cases is time which has simply "worn out" the asphalt. Of course weather also plays a major part in deterioration, especially on asphalt that had not been properly maintained. Motor oil, gasoline, and other household chemicals also breakdown the asphalt if they are left to soak in.
|
Crack Filling
Trucking
Excavating
Street Print™
Frequently Asked Questions
|
